Juniper EX4300 Hardware Manual page 142

EX4300 Switch Hardware Guide
Table 70: Optical interface Support for SFP+ Transceivers in EX4300 Switches (continued)
Ethernet
Standard Specification
10GBASE-LRM Model number
Rate
Connector type
Fiber count
Transmitter wavelength
Minimum launch power
Maximum launch power
Minimum receiver sensitivity
Maximum input power
Fiber type
Core/Cladding size
Fiber grade
Modal bandwidth
Distance
DOM support
Support for Virtual Chassis
configuration
Software required
120
Value
EX-SFP-10GE-LRM
10 Gbps
LC
Dual
1310 nm
–6.5 dBm
0.5 dBm
–21 dBm
0.5 dBm
MMF
62.5/125 µm
FDDI/OM1
500 MHz/km
220 m (722 ft)
Available
Yes
EX4300-24T, EX4300-24P, EX4300-48T, EX4300-48T-AFI,
EX4300-48P, EX4300-48T-DC, and EX4300-48T-DC-AFI
switches—Junos OS for EX Series switches, Release 13.2X50-D10 or
later
EX4300-32F switches—Junos OS for EX Series switches, Release
13.2X51-D15 or later
EX4300-24T-S, EX4300-24P-S, EX4300-32F-S, EX4300-48T-S, and
EX4300-48P-S switches—Junos OS for EX Series switches, Release
13.2X51-D26 or later
50/125 µm 50/125 µm
OM2 OM3
500 MHz/km 500
MHz/km
220 m (722 ft) 220 m
(722 ft)
Copyright © 2015, Juniper Networks, Inc.