2.2.7.2.
Lift Up Motor, and 3rd Main Motor
Ver. 1.0
(1) Remove 10 Screws (Y3).
(2) Remove the Rear Cover (220).
(3) Remove 4 Silver Screws (1027).
(4) Remove the Rear Paper Tray Cover (3004).
(5) Remove 4 Silver Screws (1027).
(6) Remove the Rear Paper Tray Cover (3004).
(7) Remove 4 Silver Screws (1027).
(8) Remove the Rear Paper Tray Cover (3004).
(9) Disconnect the Harness.
(10) Remove 3 Screws (Y3).
(11) Remove the 3rd Main Motor (3134).
(12) Release the Harnesses from 3 Harness
Clamps.
(13) Disconnect the Harness on the SPC PC Board
(CN706).
(14) Remove 2 Screws (Y3).
(15) Remove the Lift Up Motor (3132).
83
DP-8020E/8020P/8016P
SEP 2006