Panasonic DP-8020E Service Manual page 266

No.
66 Transfer Current Side 2
(Small Width)
(Factory use only)
67 ADF Image Density
68 Paper Loop (Tray 3)
69 Stamp Position Adjust
70 Not Used
71 ADF Read Main Scan Pos.
(Reverse Side)
72 Original Lead Edge ADF
(Reverse Side)
73 Original Trail Edge ADF
(Reverse Side)
74 Stamp Position Adjust
(Reverse Side)
75-76 Not Used
77 Add Toner Level
78 Paper Loop (Tray 4)
79 MTF Adjust
80 Laser Power Control
(Factory use only)
81 Grid voltage Control
(Factory use only)
82 Bias DC Voltage Control
(Factory use only)
83 Temperature Sensor Value
84 Humidity Sensor Value
85 Not Used
86 ADF Reverse Stop Posi.
87 ADF Exhaust Stop Posi.
88-89 Not Used
90 ADF Image Read Start
91 Original Lead Edge ADF
92 Original Trail Edge ADF
93 ADF 100% Image 1-Sided
94 ADF 100% Image 2-Sided
Ver. 1.0
Item
Transfer Current
Compensation of ADF image density.
Individual Fine Adjustment for Tray 3
Adjustment of verification stamp position.
Adjustment of ADF horizontal image read
start position.
Adjustment of ADF Original Lead Edge
Adjustment of ADF Original Trail Edge
Adjustment of Stamp Position
Adjustment of Toner supply
Individual Fine Adjustment for Tray 4
Adjustment of Scanning Sharpness by digital
image processing for Text /Photo Copy Mode.
Value of Gamma Table for Photo Mode.
Value of Laser duty of Check pattern.
Value of Laser duty of Black pattern.
Value of Temperature sensor.
Value of Humidity sensor.
Adjustment of ADF reverse stop position.
Adjustment of ADF exit stop position
Adjustment of ADF horizontal image read
start position.
Adjustment of original detection timing.
Adjustment of trail edge detection timing.
Adjustment of magnification for 1-sided.
Adjustment of magnification for 2-sided.
F6 Mode
Remarks
266
DP-8020E/8020P/8016P
Setting
Range
-20 - +20
0.15uA
-99 - +99
-99 - +99
-50 - +50
0.3mm
-99 - +99
0.05mm
-99 - +99
0.3mm
-127 - +127
0.3mm
-50 - +50
0.3mm
-1 - +1
1
-99 - +99
-2 - +2
1
-99 - +99
(Read Only)
-99 - +99
(Read Only)
-99 - +99
(Read Only)
0 - 255
(Read Only)
0 - 255
(Read Only)
-99 - +99
0.3mm
-99 - +99
0.3mm
-99 - +99
0.05mm
-99 - +99
0.3mm
-127 - 127
0.3mm
-9 - +9
0.1%
-9 - +9
0.1%
SEP 2006