Control Panel Unit, Battery; Replace The Battery - Panasonic DP-8020E Service Manual

2.2.3.

Control Panel Unit, Battery

CAUTION
!
Denotes hazards that could result in minor injury or damage to the machine.
*
THIS PRODUCT CONTAINS A LITHIUM BATTERY. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE.
IMPROPER USE OR REPLACEMENT MAY CAUSE OVERHEATING, RUPTURE OR EXPLOSION RESULTING IN
INJURY OR FIRE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS OF YOUR LOCAL
SOLID WASTE OFFICIALS AND LOCAL REGULATIONS.
Note: The service life of the Battery is approximately 1 year under normal use.
Avertissement
!
CE PRODUIT CONTIENT UNE PILE AU LITHIUM. REMPLACEZ UNIQUEMENT AVEC LE MÊME TYPE DE PILE
OU UN TYPE ÉQUIVALENT. UNE UTILISATION OU UN REMPLACEMENT IMPROPRE POURRAIT CAUSER
UNE SURCHARGE, UNE RUPTURE OU UNE EXPLOSION RÉSULTANT EN DES BLESSURES OU UN
INCENDIE. DÉBARASSEZ-VOUS DES PILES USÉES EN RESPECTANT LA RÉGLEMENTATION LOCALE SUR
LA MISE AU REBUT DES DÉCHETS SOLIDES.
* Notice: California only:
This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material - special handling
may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate
Ver. 1.0
<Replace the Battery>
(1) Remove 1 Screw (Q8).
(2) Remove the Battery Holder (503).

(3) Replace the Battery (504*).

Note:
Ensure that the battery is installed with correct
polarity.
(4) Reinstall the Battery Holder (503), and the
Screw (Q8).
59
DP-8020E/8020P/8016P
SEP 2006