Panasonic DP-8020E Service Manual page 407

Ver. 1.0
(58) Remove the Dummy Plug.
(59) Install 1 Clamp (DZJK000023) and 1 Edge
Saddle.
(60) Route the PTC-AC Harness 4 through the hole
in the frame as illustrated.
(61) Connect the PTC-AC Harness 4.
(62) Secure the PTC-AC Harness 4 with the Harness
Clamp and Edge Saddle.
(63) Proceed with the installation of other options.
If finished, reinstall all Harnesses and Covers.
(64) Plug the AC Power Cord and turn the Power
Switch on the Right Side of the machine to the
ON position.
(65) Reconnect the Telephone Line Cable if it was
disconnected.
407
DP-8020E/8020P/8016P
SEP 2006