Panasonic DP-8020E Service Manual page 230

Code
E13 No Toner Detection
4.6.4. Technician Warning
The following message will be displayed in the event.
LCD Message
HDD OPTION REQURIES
ADDITIONAL SORT MEM
MACHINE ID ERROR
Ver. 1.0
Function
E13: Out of Toner
Possible Cause(s)
1. Out of Toner.
2. Toner Bottle not installed.
3. Toner Bottle not installed correctly.
4. Toner Sensor disconnected.
5. Toner Sensor defective.
6. SPC PCB connector disconnected.
7. SPC PCB defective.
Possible Cause(s)
1. Additional Sort memory is not installed.
• DA-SM16 (16 MB)
• DA-SM64 (64 MB)
• DA-SM28 (128 MB)
2. Make sure the SDRM PC Board was installed properly.
1. Incorrect SC PCB is installed.
• SC PCB for DP-8020E
• SC PCB for DP-8020P
• SC PCB for DP-8016P
2. SPC PCB defective.
230
DP-8020E/8020P/8016P
SEP 2006