Fax Service Mode 6 (Ram Initialization); Ram Initialization Table - Panasonic DP-8020E Service Manual

5.2.6.

Fax Service Mode 6 (RAM Initialization)

Initializes RAM, and restores the Function Parameters to their default values.
Note:
This operation should be performed when the unit is first installed.
Press the "V", "/\" arrow keys to select the "6: RAM initialize" on the display.
↓
Press the "SET" key to select the desired Mode number.
↓
Press the "SET" key to initialize RAM.
↓
Press the "STOP" key twice to exit the service mode.
No. Initialize Mode
01 PARAMETER INITIALIZE
02 JOURNAL CLEAR
03 AUTO DIAL CLEAR
04 PROGRAM DIAL CLEAR
05 LOGO/ID/PSWD CLEAR
06 LBP ERROR LOG CLEAR
07 SHIPMENT SET
08 FLASH MEMORY CLEAR
09 ALL JOB CLEAR
Ver. 1.0

RAM Initialization Table

Restores the Fax, and Function Parameters to default
values.
Note: Turn the Power Switch to the OFF, and back to the
ON position to enable the parameter settings.
Clears the Journal contents.
Clears the One-touch, ABBR Numbers, and Phone
Books.
Clears the Program keys.
Clears the Logo, ID, Polling Password.
Clears the Printer Error Log.
Deletes all setting information, except parameter number
80, and 81, then set default values.
Deletes all information in the Flash Memory.
Clears all Jobs stored in Flash Memory.
294
DP-8020E/8020P/8016P
Description
SEP 2006