Panasonic DP-8020E Service Manual page 383

Ver. 1.0
(12) Place the 3rd Paper Tray Unit onto the 4th
Paper Tray Unit.
(13) Slide the 3rd Paper Tray out of the unit.
(14) Secure the 3rd Paper Tray Unit with 5 Screws
(M3 x 6, M3 x 8).
(15) Remove the Harness from Clamps of the 4th
Paper Tray Unit.
Note:
Close the right clamp and leave the left clamp
open.
Caution:
Ensure that the Black Wire is on the Left Side,
and that it connects to Pin 1 of the female
connector as illustrated.
Inserting the connector upside-down, may damage
the machine's SPC or CST PC Board.
(16) Route the 4th Paper Tray Unit's Harness through
the access hole at the bottom of the 3rd Paper
Tray Unit as illustrated
(17) Connect the Harness of the 4th Paper Tray Unit
to CN808 on the CST3 PC Board of the 3rd
Paper Tray Unit.
(18) Secure the Harness with the Clamp and Edge
Saddle while adjusting the harness length.
383
DP-8020E/8020P/8016P
SEP 2006