Total Counter View Mode On The Lcd; Lcd Display Brightness Adjustment - Panasonic DP-8020E Service Manual

Mechanical Parts
No.
29 Charge Corona Case 1444
30 Charge Wire
31 Cleaning Blade
32 Front Cleaning Felt
33 Rear Cleaning Felt
34 Cleaning Sponge
35 Splash Prevention
Sheet
Fuser Unit
36 Fuser Roller
37 Pressure Roller
38 Fuser Roller Bushing 1114
39 Pressure Roller
Bushing
40 Thermistor
Assembly
41 Fuser Lamp
42 Separator
43 Exit 2 Roller
Main Unit
44 Ozone Filter
45 Toner Spill Tray
Note:
1. Wet Cloth represents a soft cloth saturated with water.
For stubborn toner accumulation, wipe with a soft cloth saturated with Isopropyl Alcohol first, then
follow up with a soft cloth saturated with water.
2. The Maintenance Cycle is based on the Counter Information for each individual module.
To verify the counter information, print the Total Counter List using the Service Mode: F7 - Electronic
Counter - 00 (List Print).
3. Cleaning, Replacement, and Adjustment Cycle (Sheet) are based on using Panasonic's recommended
standard paper, and supplies. These cycles may vary with the kind of paper used, Paper size,
orientation, print duty, continuous/interval print, and/or ambient conditions.

• Total Counter View Mode on the LCD

The Total Counter can be displayed on the Panel Display by pressing "COPY SIZE", and "PAPER TRAY"
keys simultaneously in Standby mode for quick reference.
TOTAL COUNTER

• LCD Display Brightness Adjustment

To adjust the brightness of the LCD display, press and while holding down the "CLEAR" key, keep
pressing the "ORIGINAL SIZE", or the "COPY SIZE" key until the desired brightness is achieved.
ORIGINAL SIZE: Dimmer
COPY SIZE
Ver. 1.0
Cleaning
Ref.
Cycle
No.
(Sheet)
60K
1443 10K
By Customer
1408 -
1410 -
1411 -
1412 -
1415 -
1115 60K
1021 60K
-
1020 -
1125 60K
1116 -
1109 60K
1104 60K
825 -
1202 60K
1234
: Brighter
Replacement/Adjustment
Cycle
Method
(Sheet)
- -
- 60K
- 60K
- 60K
- 60K
- 60K
- 60K
1
120K
Water
1
240K
Water
- 120K
- 240K
Dry soft cloth 120K
- 240K
Dry soft cloth 120K
1
-
Water
- 240K
- -
107
DP-8020E/8020P/8016P
Ref.
Counter
Procedure
Refer to F7-07
2.2.5.
Refer to F7-02
2.2.6.
F7-02
Refer to
2.2.13.
SEP 2006