Correct
Key
HDD
Ver. 1.0
(27) Connect one end of the HD Harness to the HDD.
(28) Secure the HD Harness and DC12 Harness
Note:
Incorrect
Key
HDD
(29) Install the HDD Cover.
(30) Secure the HDD Cover with 4 Screws.
(31) Reinstall the Right Bracket Assembly.
(32) Install 1 Harness Clamp (Medium).
358
See Note below.
with the Harness Clamps.
Make sure that the HD Harness is connected to
the HDD correctly as illustrated.
1. The Key on the connector must be facing
Upwards.
2. Either connector of the HD Harness will fit into
the HDD. However, the correct one is shown in
the illustration (Harness comes out from the top
of the connector).
DP-8020E/8020P/8016P
SEP 2006