Ver. 1.0
(3) Remove the Black Pin Protector from Slot 1
(CN62), if it was pre-installed.
(4) Install 2 PC Board Supporters for the Slot 1 on
the SC PC Board.
(5) Install the Program Expansion Board into Slot
1 (CN62) on the SC PC Board and secure with
the Supporters.
Note:
The Program Extension F-ROM Board must
always be installed into Slot 1 (CN62) for the PCL
or PCL/PS Printer Option to function.
(6) Proceed with the installation of other options.
If finished, reinstall all Harnesses and Covers.
(7) Plug the AC Power Cord and turn the Power
Switch on the Right Side of the machine to the
ON position.
(8) Reconnect the Telephone Line Cable if it was
disconnected.
363
DP-8020E/8020P/8016P
SEP 2006