Ver. 1.0
(17) Shake the Developer Bottle thoroughly (approx.
30 seconds).
(18) Pour the developer evenly into the developer unit
by turning the Black Gear as illustrated. Make
sure to empty the bottle.
<Removing the Old OPC Drum>
(19) Remove the OPC Drum Shaft Holder
Assembly.
(20) Remove the Roller Spacer (1409).
(21) Lift the OPC Drum, holding the left side where
the OPC Drum Shaft Holder Assembly was
installed.
(22) Remove 1 Screw (X9).
(23) Remove the Charge Corona Assembly.
71
DP-8020E/8020P/8016P
SEP 2006