Panasonic DP-8020E Service Manual page 386

Ver. 1.0
(34) Place the machine onto the 2nd Paper Tray
Unit.
Caution:
The machine weights approximately 93.26 - 98.33
lb (42.3 - 44.6 kg). To prevent injuries, use the
appropriate number of personnel, and the proper
equipment to lift or move the machine.
(35) Slide the 1st Paper Tray out of the unit.
(36) Secure the machine with 5 Screws
(M3 x 6, M3 x 8).
(37) Remove the Harness from Clamps of the 2nd
Paper Tray Unit.
Note:
Close the clamps.
Caution:
Ensure that the Black Wire is on the Left Side,
and that it connects to Pin 1 of the female
connector as illustrated.
Inserting the connector upside-down, may damage
the machine's SPC or CST PC Board.
(38) Route the 2nd Paper Tray Unit's Harness
through the access hole at the bottom of the
machine Unit as illustrated
(39) Connect the Harness of the 2nd Paper Tray Unit
to CN707 on the SPC PC Board.
(40) Secure the Harness with the Clamps and Edge
Saddle.
(41) Proceed with the installation of other options.
If finished, reinstall all Harnesses and Covers.
386
DP-8020E/8020P/8016P
SEP 2006