Removing The Old Developer, And Toner - Panasonic DP-8020E Service Manual

Ver. 1.0
(12) Turn the OPC Drum Assembly in the direction
of the arrow, and remove.
Caution:
Exercise caution not to scratch the surface of the
OPC Drum (Green), and not to touch it with bare
hands.
Caution:
The OPC Drum is sensitive to light. To prevent
optical exposure problems, do not expose the
OPC Drum to direct sunlight, or bright light.
Even if it is a fluorescent lamp, approx.1000 lm/m
(1000 lx).
(13) Release 3 Latch Hooks, and remove the
Developer Cover.
(14) Remove the Support Pipe (1338).
<Removing the Old Developer, and Toner>
(15) Hold the Developer Unit as illustrated over a
suitable container, and dump the used
Developer, and Toner by rotating the Gear.
(16) Clean the Developer Unit with a soft dry cloth.
70
DP-8020E/8020P/8016P
2
SEP 2006