Installing The Printer Controller Module For Ps / Pcl6 (Da-Mc820) - Panasonic DP-8020E Service Manual

8.3.

Installing the Printer Controller Module for PS / PCL6 (DA-MC820)

8.3.1. Contents
No. Qty.
1 1
2 1
3 1
4 1
Note:
Refer to the Parts Manual for Part Number(s), Packing, and Accessories detail.
8.3.2. Installation
1. Before installing this option, make sure the Program Expansion Board (DA-EM600) is installed into Slot
1 on the SC PC Board first. Refer to the Installation Instructions of the Program Expansion Board (DA-
EM600).
2. Install the Hardware Key by following the steps below.
CAUTION!
Turn the Power Switch on the Right Side of the machine to the OFF position, and then unplug the
AC Power Cord before beginning installation. (During a Lightning Storm, to prevent electrocution
disconnect the Telephone Line Cable first before unplugging the AC Power Cord, if the Fax
Option is installed.)
Ver. 1.0
Description
Hardware Key
Software CD
Adobe PostScript 3 Label
Installation Instructions
1 2
PS KEY
Includes Operating Instructions
This document
3
(1) Remove 10 Screws.
(2) Remove the Rear Cover.
337
DP-8020E/8020P/8016P
Remarks
4
SEP 2006