Step 2 Internet Access Ethernet; Figure 18 Ethernet Encapsulation: Static: Finish - ZyXEL Communications ZyWALL 1050 User Manual

ZyWALL 1050 User's Guide

4.3.3 Step 2 Internet Access Ethernet

You do not configure this screen if you selected Auto as the IP Address Assignment in the
previous screen.
Note: Enter the Internet access information exactly as given to you by your ISP.
WAN Interface: This is the number of the interface that will connect with your ISP.
Zone: This is the security zone to which this interface and Internet connection will belong.
IP Address: Enter your (static) public IP address.
IP Subnet Mask: Enter the subnet mask for this WAN connection's IP address.
Gateway IP Address: Enter the IP address of the router through which this WAN connection
will send traffic (the default gateway).
DNS Server: The Domain Name System (DNS) maps a domain name to an IP address and
vice versa. Enter a DNS server's IP address(es). The ZyWALL uses these (in the order you
specify here) to resolve domain names for VPN, DDNS and the time server.

Figure 18 Ethernet Encapsulation: Static: Finish

You have set up your ZyWALL to access the Internet.
Note: If you have not already done so, you can register your ZyWALL with
myZyXEL.com and activate trials of services like IDP. You can click Next and
use the following screen to perform a basic registration (see
page
account details, click myZyXEL.com.
Alternatively, click Close to exit the wizard.
72
83). If you want to do a more detailed registration or manage your
Section 4.4 on
Chapter 4 Wizard Setup