Figure 283 Web Configurator for Non-Admin Users
The following table describes the labels in this screen.
Table 141 Web Configurator for Non-Admin Users
LABEL
User-defined
lease time (max
... minutes)
Renew
Updating lease
time
automatically
Remaining time
before lease
timeout
Remaining time
before auth.
timeout
Chapter 27 User/Group
DESCRIPTION
Access users can specify a lease time shorter than or equal to the one that you
specified. The default value is the lease time that you specified.
Access users can click this button to reset the lease time, the amount of time
remaining before the ZyWALL automatically logs them out. The ZyWALL sets this
amount of time according to the
•
User-defined lease time field in this screen
•
Lease time field in the User Add/Edit screen (see
•
Lease time field in the Setting screen (see
This box appears if you checked the Allow renewing lease time automatically
box in the Setting screen. (See
select this check box to reset the lease time automatically 30 seconds before it
expires. Otherwise, access users have to click the Renew button to reset the lease
time.
This field displays the amount of lease time that remains, though the user might be
able to reset it.
This field displays the amount of time that remains before the ZyWALL
automatically logs the access user out, regardless of the lease time.
ZyWALL 1050 User's Guide
Section 27.2.1 on page
Section 27.4 on page
Section 27.4 on page
431.) Access users can
426)
431)
435