ZyWALL 1050 User's Guide
34.3 Time and Date
This section shows you how:
1 To manually set the ZyWALL date and time.
2 To get the ZyWALL date and time from a time server.
For effective scheduling and logging, the ZyWALL system time must be accurate. The
ZyWALL's Real Time Chip (RTC) keeps track of the time and date. There is also a software
mechanism to set the time manually or get the current time and date from an external server.
To change your ZyWALL's time based on your local time zone and date, click Configuration
> System > Date/Time. The screen displays as shown.
Figure 319 System > Date and Time
The following table describes the labels in this screen.
Table 169 System > Date and Time
LABEL
Current Time and
Date
Current Time
Current Date
Time and Date
Setup
490
DESCRIPTION
This field displays the present time of your ZyWALL.
This field displays the present date of your ZyWALL.
Chapter 34 System