Configuring Ftp; Figure 343 System > Ftp; Table 181 System > Ftp - ZyXEL Communications ZyWALL 1050 User Manual

35.9 Configuring FTP

You can upload and download the ZyWALL's firmware and configuration files using FTP. To
use this feature, your computer must have an FTP client. Please see
more information about firmware and configuration files.
To change your ZyWALL's FTP settings, click Configuration > System > FTP tab. The
screen appears as shown.
Figure 343 System > FTP
The following table describes the labels in this screen.
Table 181 System > FTP
LABEL
Enable
TLS required
Server Port
Server Certificate Select the certificate whose corresponding private key is to be used to identify the
Service Control
#
Zone
Address
Action
Chapter 35 System Remote Management
DESCRIPTION
Select the check box to allow or disallow the computer with the IP address that
matches the IP address(es) in the Service Control table to access the ZyWALL
using this service.
Select the check box to use FTP over TLS (Transport Layer Security) to encrypt
communication.
This implements TLS as a security mechanism to secure FTP clients and/or servers.
You may change the server port number for a service if needed, however you must
use the same port number in order to use that service for remote management.
ZyWALL for FTP connections. You must have certificates already configured in the
My Certificates screen (Click My Certificates and see
details).
This specifies from which computers you can access which ZyWALL zones.
This the index number of the service control rule.
This is the zone on the ZyWALL the user is allowed or denied to access.
This is the object name of the IP address(es) with which the computer is allowed or
denied to access.
This displays whether the computer with the IP address specified above can access
the ZyWALL zone(s) configured in the Zone field (Accept) or not (Deny).
ZyWALL 1050 User's Guide
Chapter 9 on page 167
Chapter 33 on page 469
for
for
519