Internet Access Setup; Ethernet Encapsulation; Figure 3-6 Menu 4 - Internet Access Setup (Ethernet) - ZyXEL Communications ZyWALL 10 User Manual

ZyWALL 10 Internet Security Gateway
Press the space bar to select the RIP direction from None, Both/In
RIP Direction
Only/Out Only.
Version Press the space bar to select the RIP version from RIP-1/RIP-
2B/RIP-2M.
Incoming Enter the filter set(s) you wish to apply to the incoming traffic
Protocol Filters between this node and the ZyWALL.
Outgoing Enter the filter set(s) you wish to apply to the outgoing traffic
Protocol Filters between this node and the ZyWALL.
When you have completed this menu, press [Enter] at the prompt [Press ENTER to Confirm...] to save
your configuration, or press [Esc] at any time to cancel.
3.3

Internet Access Setup

You will see three different Menu 4 screens depending on whether you chose Ethernet, PPTP or PPPoE
Encapsulation.

3.3.1 Ethernet Encapsulation

You must choose the Ethernet option when the WAN port is used as a regular Ethernet. The PPPoE choice
is for a dial-up connection using PPPoE. If you choose Ethernet in Menu 4 you will see the next screen.
3-8
Menu 4 - Internet Access Setup
ISP's Name= ChangeMe
Encapsulation= Ethernet
Service Type= Standard
My Login= N/A
My Password= N/A
Login Server IP= N/A
IP Address Assignment= Dynamic
IP Address= N/A
IP Subnet Mask= N/A
Gateway IP Address= N/A
Network Address Translation= Full Feature
Press ENTER to Confirm or ESC to Cancel:

Figure 3-6 Menu 4 - Internet Access Setup (Ethernet)

None
RIP-1
Internet Access