Pppoe: Static Ip Address Assignment; Figure 20 Pppoe Encapsulation: Auto: Finish - ZyXEL Communications ZyWALL 1050 User Manual

Hide thumbs Also See for ZyWALL 1050:

Table of Contents

ZyWALL 1050 User's Guide

Table 10 PPPoE Encapsulation: Auto (continued)

WAN Interface

The ZyWALL applies the configuration settings.

You have set up your ZyWALL to access the Internet.

Note: If you have not already done so, you can register your ZyWALL with

myZyXEL.com and activate trials of services like IDP. You can click Next and

use the following screen to perform a basic registration (see

account details, click myZyXEL.com.

Alternatively, click Close to exit the wizard.

4.3.5 PPPoE: Static IP Address Assignment

If you select Static as the IP Address Assignment, the following screen displays.

This displays the identity of the interface you configure to connect with your ISP.

This field displays to which security zone this interface and Internet connection will

The ISP will assign your WAN IP address automatically

Click Next to continue.

83). If you want to do a more detailed registration or manage your

Section 4.4 on

Chapter 4 Wizard Setup