Figure 213 Policy > Application Patrol > Configuration > Edit; Table 103 Policy > Application Patrol > Configuration > Edit - ZyXEL Communications ZyWALL 1050 User Manual

ZyWALL 1050 User's Guide
Figure 213 Policy > Application Patrol > Configuration > Edit
The following table describes the labels in this screen.
Table 103 Policy > Application Patrol > Configuration > Edit
LABEL
Service
Enable
Service
Service
Identification
Name
Classification
Default Port
Add icon
326
DESCRIPTION
Select this check box to turn on patrol for this application.
This field displays the name of the application.
Specify how the ZyWALL should identify this application. Choices are:
Port-less - the ZyWALL identifies this application by matching the IP payload with
the application's pattern(s).
Port-base - the ZyWALL identifies this application by looking at the destination port
in the IP header.
This field is available if the classification is Port-base. You can view and edit the
ports used to identify this application.
This field is available if the classification is Port-base. This column provides icons
to add and remove port numbers used to identify the application.
To add a port number, click the Add icon at the top of the column. Type the
destination port number in the new Default Port record.
To remove a port number, click the Remove icon next to the port number. The Web
configurator confirms that you want to delete the port number before doing so.
Chapter 20 Application Patrol