Set Up The Policy Route For The Vpn Tunnel; Figure 73 Object > Address > Address > Add; Figure 74 Network > Ipsec Vpn > Vpn Connection > Add - ZyXEL Communications ZyWALL 1050 User Manual

ZyWALL 1050 User's Guide
Figure 73 Object > Address > Address > add
3 Repeat the process to create a new address object for the remote network
("VPN_REMOTE_SUBNET", 192.168.1.0/24).
4 Click Network > IPSec VPN > VPN Connection. Click the Add icon.
5 Give the VPN connection a name ("VPN_CONN_143"), and select the VPN gateway
(Section 6.2.3 on page
settings in this example--ESP, Tunnel encapsulation, DES encryption, and SHA1
authentication--so do not change these settings. In the Policy section, select the address
objects for the local and remote networks. Click OK.
Figure 74 Network > IPSec VPN > VPN Connection > add

6.2.5 Set up the Policy Route for the VPN Tunnel

You should create a new policy route to use the VPN tunnel. This policy route will only use
the existing address objects, so you do not have to create any additional objects first.
134
133) in the VPN Gateway section. Use the default proposal
Chapter 6 Tutorials