Figure 69 Network > Interface > Ethernet > Ge3 > Ip Address; Figure 70 Network > Interface > Ethernet > Ge1 > Ip Address; Figure 71 Network > Interface > Ethernet > Ge1 > Dhcp Settings - ZyXEL Communications ZyWALL 1050 User Manual

ZyWALL 1050 User's Guide
Figure 69 Network > Interface > Ethernet > ge3 > IP Address
3 In Network > Interface > Ethernet, click the Edit icon for ge1.
4 Change the static IP address to 192.168.10.1.
Figure 70 Network > Interface > Ethernet > ge1 > IP Address
5 The DHCP server is active, and you have to keep the IP Pool Start Address in the same
subnet as the interface. Change it to 192.168.10.33. Click OK.
Figure 71 Network > Interface > Ethernet > ge1 > DHCP Settings
Release the old IP address the ZyWALL assigned to your computer (192.168.1.0/24), and
renew the IP address again so that the ZyWALL assigns you an IP address in the new subnet
(192.168.10.0/24). Go to
132
http://192.168.10.1 to log in to the ZyWALL again.
Chapter 6 Tutorials