Set Up Bandwidth Restrictions; Figure 94 Policy > App Patrol > Http > Edit - ZyXEL Communications ZyWALL 1050 User Manual

1 Click Policy > App Patrol. If application patrol is not enabled, enable it, and click
Apply.
2 Click the Edit icon next to http.
3 Change the default policy to drop because you do not want anyone except authorized
user groups to browse the web. Then, click the Add icon in the exception list (not the
Allow Port list). In the new exception, select one of the user groups that is allowed to
browse the web. Repeat this process to add exceptions for all the other user groups that
are allowed to browse the web, and then click OK.
Figure 94 Policy > App Patrol > http > edit

6.4.5 Set up Bandwidth Restrictions

You have to use policy routes to set up bandwidth restrictions for user groups.
1 Click Policy > Route > Policy Route. This policy route should have higher priority than
the default policy route for the trunk, so click the Add icon at the top of the column, not
the one next to the existing policy route.
Chapter 6 Tutorials
ZyWALL 1050 User's Guide
145