Example: Selecting A Vpn Authentication Method; Figure 307 Objects > Auth. Method > Add; Table 160 Objects > Auth. Method > Add - ZyXEL Communications ZyWALL 1050 User Manual

Figure 307 Objects > Auth. Method > Add
The following table describes the labels in this screen.
Table 160 Objects > Auth. Method > Add
LABEL
Name
Method List
OK
Cancel

32.3.1 Example: Selecting a VPN Authentication Method

After you set up an authentication method in the Auth. Method screens, you can use it in the
VPN Gateway screen to authenticate VPN users for establishing a VPN connection. Refer to
the chapter on VPN for more information.
Follow the steps below to specify the authentication method for a VPN connection.
1 Access the VPN Gateway screen.
2 Select Enable Extended Authentication.
3 Select Server Mode and select an authentication method object from the drop-down list
box.
Chapter 32 Authentication Objects
DESCRIPTION
Specify a descriptive name for identification purposes.
You may use 1-31 alphanumeric characters, underscores(_), or dashes (-), but the
first character cannot be a number. This value is case-sensitive. For example,
"My_Device".
Select a server object from the drop-down list box. You can create a server object in
in the Auth. Method screen (see
The ZyWALL authenticates the users using the databases (in the local user
database or the external authentication server) in the order they appear in this
screen.
If two accounts with the same username exist on two authentication servers you
specify, the ZyWALL does not continue the search on the second authentication
server when you enter the username and password that doesn't match the one on
the first authentication server.
Click to add a new entry.
Click to edit the settings of an entry.
Click to delete an entry.
Click OK to save the changes.
Click Cancel to discard the changes.
ZyWALL 1050 User's Guide
Chapter 31 on page 455 for more information).
467