Internet Access: Ethernet - ZyXEL Communications ZyWall USG20-VPN User Manual

Figure 23 Internet Access: Step 1
• I have two ISPs: Select this option to configure two Internet connections. Leave it cleared to
configure just one. This option appears when you are configuring the first WAN interface.
• Encapsulation: Choose the Ethernet option when the WAN port is used as a regular Ethernet.
Otherwise, choose PPPoE or PPTP for a dial-up connection according to the information from
your ISP.
• WAN Interface: This is the interface you are configuring for Internet access.
• Zone: This is the security zone to which this interface and Internet connection belong.
• IP Address Assignment: Select Auto if your ISP did not assign you a fixed IP address.
Select Static if the ISP assigned a fixed IP address.

2.1.2 Internet Access: Ethernet

This screen is read-only if you set the previous screen's IP Address Assignment field to Auto. If
you set the previous screen's IP Address Assignment field to Static, use this screen to configure
your IP address settings.
Note: Enter the Internet access information exactly as given to you by your ISP or
network administrator.
Chapter 2 Installation Setup Wizard
USG20(W)-VPN Series User's Guide
38