ZyWALL 1050 User's Guide
Figure 51 Status > Interface Status Summary, After Ethernet Interfaces
6.1.3 WAN Trunk
This example sets up trunk WAN_TRUNK with ge3 and ge4. This example uses the default
settings for the trunk and shows how to add the interfaces to it.
Table 30 Trunk Example
ETHERNET
INTERFACE
ge1
ge3
ge4
ge5
There are no existing trunks at the beginning of this example.
1 Click Network > Interface > Trunk. The following screen appears.
Figure 52 Network > Interface > Trunk, Initial
2 Click the Add icon. The following screen appears.
124
TRUNK
---
WAN_TRUNK
WAN_TRUNK
---
Chapter 6 Tutorials