My Certificate Edit Screen - ZyXEL Communications ZyWALL 1050 User Manual

Table 162 My Certificates Add Screen (continued)
LABEL
CA Server Address
CA Certificate
Request
Authentication
OK
Cancel
If you configured the My Certificate Create screen to have the ZyWALL enroll a certificate
and the certificate enrollment is not successful, you see a screen with a Return button that
takes you back to the My Certificate Create screen. Click Return and check your
information in the My Certificate Create screen. Make sure that the certification authority
information is correct and that your Internet connection is working properly if you want the
ZyWALL to enroll a certificate online.

33.6.2 My Certificate Edit Screen

Click Configuration > Object > Certificate > My Certificates and then the edit icon to open
the My Certificate Edit screen. You can use this screen to view in-depth certificate
information and change the certificate's name.
Chapter 33 Certificates
DESCRIPTION
This field applies when you select Create a certification request and enroll
for a certificate immediately online. Enter the IP address (or URL) of the
certification authority server.
For a URL, you can use up to 511 of the following characters. a-zA-Z0-9'()+,/
:.=?;!*#@$_%-
This field applies when you select Create a certification request and enroll
for a certificate immediately online. Select the certification authority's
certificate from the CA Certificate drop-down list box.
You must have the certification authority's certificate already imported in the
Trusted Certificates screen. Click Trusted CAs to go to the Trusted
Certificates screen where you can view (and manage) the ZyWALL's list of
certificates of trusted certification authorities.
When you select Create a certification request and enroll for a certificate
immediately online, the certification authority may want you to include a
reference number and key to identify you when you send a certification
request.
Fill in both the Reference Number and the Key fields if your certification
authority uses CMP enrollment protocol. Just the Key field displays if your
certification authority uses the SCEP enrollment protocol.
For the reference number, use 0 to 99999999.
For the key, use up to 31 of the following characters. a-zA-Z0-
9;|`~!@#$%^&*()_+\{}':,./<>=-
Click OK to begin certificate or certification request generation.
Click Cancel to quit and return to the My Certificates screen.
ZyWALL 1050 User's Guide
477