ZyXEL Communications ZyWALL 1050 User Manual page 432

ZyWALL 1050 User's Guide
Table 139 User/Group > Setting (continued)
LABEL
Lease Time
Reauthenticat
ion Time
User Logon
Setting
Limit ... for
administration
account
Maximum
number per
administration
account
Limit ... for
access
account
Maximum
number per
access
account
User Lockout
Setting
Enable logon
retry limit
Maximum
retry count
Lockout
period
User
Miscellaneous
Setting
Allow
renewing
lease time ...
Enable user
idle detection
User idle
timeout
432
DESCRIPTION
Select the default lease time when you create a new user account. You can specify
1 to 1440 minutes. You can enter 0 to make the number of minutes unlimited. You
can still change the lease time for each user account.
Select the default reauthentication time when you create a new user account. You
can specify 1 to 1440 minutes. You can enter 0 to make the number of minutes
unlimited. You can still change the reauthentication time for each user account.
Select this check box if you want to set a limit on the number of simultaneous logins
by admin users. If you do not select this, admin users can login as many times as
they want at the same time using the same or different IP addresses.
This field is effective when Limit ... for administration account is checked. Type
the maximum number of simultaneous logins by each admin user. The number
must be between 1 and 1024.
Select this check box if you want to set a limit on the number of simultaneous logins
by non-admin users. If you do not select this, access users can login as many times
as they want as long as they use different IP addresses.
This field is effective when Limit ... for access account is checked. Type the
maximum number of simultaneous logins by each access user. The number must
be between 1 and 1024.
Select this check box to set a limit on the number of times each user can login
unsuccessfully (for example, wrong password) before the IP address is locked out
for a specified amount of time.
This field is effective when Enable logon retry limit is checked. Type the maximum
number of times each user can login unsuccessfully before the IP address is locked
out for the specified lockout period. The number must be between 1 and 99.
This field is effective when Enable logon retry limit is checked. Type the number
of minutes the user must wait to try to login again, if logon retry limit is enabled
and the maximum retry count is reached. This number must be between 1 and
65,535 (about 45.5 days).
Select this check box if access users can renew lease time automatically, as well as
manually, simply by checking the Update lease time automatically check box on
their screen.
This is applicable for access users.
Select this check box if you want the ZyWALL to monitor how long each access
user is logged in and idle (in other words, there is no traffic for this access user).
The ZyWALL automatically logs out the access user once the User idle timeout
has been reached.
This is applicable for access users.
This field is effective when Enable user idle detection is checked. Type the
number of minutes each access user can be logged in and idle before the ZyWALL
automatically logs out the access user.
Chapter 27 User/Group