FIELD
Outgoing
Enter the filter set(s) you wish to apply to the outgoing traffic between
Protocol Filters
this node and the Prestige.
When you have completed this menu, press [ENTER] at the prompt [Press ENTER to Confirm...] to save
your configuration, or press [ESC] at any time to cancel.
3.3
Internet Access Setup
You will see three different menu 4 screens depending on whether you chose Ethernet, PPTP or PPPoE
encapsulation.
In the Encapsulation field in menu 4, choose:
Ethernet when the WAN port is used as a regular Ethernet.
PPTP or PPPoE if you have a dial-up connection to the Internet.
3.3.1 Ethernet Encapsulation
You must choose the Ethernet option when the WAN port is used as a regular Ethernet. If you choose
Ethernet in menu 4 you will see the next screen.
The following table describes this screen.
3-10
Prestige 314 PLUS Broadband Sharing Gateway with 4-Port Switch
DESCRIPTION
Menu 4 - Internet Access Setup
ISP's Name= myISP
Encapsulation= Ethernet
Service Type= Standard
My Login= N/A
My Password= N/A
Login Server IP= N/A
IP Address Assignment= Dynamic
IP Address= N/A
IP Subnet Mask= N/A
Gateway IP Address= N/A
Network Address Translation = SUA Only
Press ENTER to Confirm or ESC to Cancel:
Figure 3-6 Internet Access Setup (Ethernet)
EXAMPLE
Internet Access