Console Port Speed; Dns Overview; Dns Server Address Assignment; Figure 321 System > Console Port Speed - ZyXEL Communications ZyWALL 1050 User Manual

ZyWALL 1050 User's Guide

34.4 Console Port Speed

This section shows you how to set the console port speed when you connect to the ZyWALL
via the console port using a terminal emulation program. See
console port settings.
Click Configuration > System > Console Speed to open the Console Speed screen.
Figure 321 System > Console Port Speed
The following table describes the labels in this screen.
Table 171 System > Console Port Speed
LABEL
Configuration
Console Port Speed Use the drop-down list box to change the speed of the console port. Your
Apply
Reset

34.5 DNS Overview

DNS (Domain Name System) is for mapping a domain name to its corresponding IP address
and vice versa. The DNS server is extremely important because without it, you must know the
IP address of a machine before you can access it.

34.5.1 DNS Server Address Assignment

The ZyWALL can get the DNS server addresses in the following ways.
• The ISP tells you the DNS server addresses, usually in the form of an information sheet,
when you sign up. If your ISP gives you DNS server addresses, manually enter them in
the DNS server fields.
• If your ISP dynamically assigns the DNS server IP addresses (along with the ZyWALL's
WAN IP address), set the DNS server fields to get the DNS server address from the ISP.
494
DESCRIPTION
ZyWALL supports 9600, 19200, 38400, 57600, and 115200 bps (default) for the
console port.
The Console Port Speed applies to a console port connection using terminal
emulation software and NOT the Console in the ZyWALL web configurator
Status screen.
Click Apply to save your changes back to the ZyWALL.
Click Reset to begin configuring this screen afresh.
Table 2 on page 49 for default
Chapter 34 System