Dynamic Dns Add/Edit; Figure 189 Network > Ddns > Edit; Table 88 Network > Ddns > Edit - ZyXEL Communications ZyWALL 1050 User Manual
Hide thumbs
Also See for ZyWALL 1050:
- User manual (892 pages) ,
- Support notes (345 pages) ,
- Cli reference manual (284 pages)
Table of Contents
Advertisement
ZyWALL 1050 User's Guide
Table 87 Network > DDNS (continued)
LABEL
HA Interface
Add icon
17.4 Dynamic DNS Add/Edit
The DDNS Add/Edit screen allows you to add a domain name to the ZyWALL or to edit the
configuration of an existing domain name. To access this screen, click Network > DDNS, and
click either the Add icon or an Edit icon.
Figure 189 Network > DDNS > Edit
The following table describes the labels in this screen.
Table 88 Network > DDNS > Edit
LABEL
Profile Name
DDNS Type
288
DESCRIPTION
This field applies when the IP Address Update Policy is iface. This field displays
which alternative interface is mapped to the domain name if the WAN interface is
not available. If you are not using HA, the field says none.
This column provides icons to add, edit, and remove domain names.
To add a domain name, click the Add icon at the top of the column. The DDNS
Add/Edit screen appears.
To edit a domain name, click the Edit icon next to the domain name. The DDNS
Add/Edit screen appears.
To delete a domain name, click on the Remove icon next to the ISP account. The
web configurator confirms that you want to delete the account before doing so.
DESCRIPTION
Type a descriptive name for this DDNS entry in the ZyWALL. You may use 1-31
alphanumeric characters, underscores(
cannot be a number. This value is case-sensitive.
Select the type of DynDNS service you are using. See
more information about each one.
_
), or dashes (-), but the first character
http://www.dyndns.com
Chapter 17 DDNS
for
Advertisement
Table of Contents
