Set Up The Policy Route For The Vpn Tunnel - ZyXEL Communications ZYWALL USG 2000 Manual

Unified security gateway

Hide thumbs Also See for ZYWALL USG 2000:

Table of Contents

Chapter 6 Tutorials

Give the new address object a name ("VPN_REMOTE_SUBNET"), change the

Address Type to SUBNET. Set up the Network field to 172.16.1.0 and the

Netmask to 255.255.255.0. Click OK.

Figure 64 Object > Address > Add

Click VPN > IPSec VPN > VPN Connection. Click the Add icon.

Give the VPN connection a name ("VPN_CONN_EXAMPLE"). Under VPN Gateway

select Static Site-to-site and the VPN gateway (VPN_GW_EXAMPLE). Under

Policy, select LAN_SUBNET for the local network and VPN_REMOTE_SUBNET

for the remote. Click OK.

Figure 65 VPN > IPSec VPN > VPN Connection > Add

6.3.3 Set Up the Policy Route for the VPN Tunnel

Do the following to create a policy route to have the ZyWALL send traffic through

the VPN tunnel.

ZyWALL USG 2000 User's Guide