Chapter 6 Tutorials
Click VPN > IPSec VPN > VPN Connection. Click the Add icon.
3
Give the VPN connection a name ("VPN_CONN_EXAMPLE"). Under VPN Gateway
4
select Site-to-site and the VPN gateway (VPN_GW_EXAMPLE). Under Policy,
select LAN_SUBNET for the local network and VPN_REMOTE_SUBNET for the
remote. Click OK.
Figure 77 VPN > IPSec VPN > VPN Connection > Add
6.5.3 Set Up the Policy Route for the VPN Tunnel
Do the following to create a policy route to have the ZyWALL send traffic through
the VPN tunnel.
122
ZyWALL USG 300 User's Guide