Using Hibernate Mode; Restoring Factory Default Settings - Lexmark MS810 Series User Manual

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn

Using Hibernate mode

Hibernate is an ultra‑low‑power saving mode.
Notes:
•
Three days is the default amount of time before the printer enters Hibernate mode.
• Make sure to wake the printer from Hibernate mode before sending a print job. A hard reset or a long press of
the Sleep button wakes the printer from Hibernate mode.
•
If the printer is in Hibernate mode, then the Embedded Web Server is disabled.
1
From the control panel, navigate to:
> Settings >
2
Select Press Sleep Button or Press and Hold Sleep Button, and then press
3
Press Hibernate >

Restoring factory default settings

If you want to keep a list of the current menu settings for reference, then print a menu settings page before restoring
the factory default settings. For more information, see
If you want a more comprehensive method of restoring the printer factory default settings, then perform the Wipe All
Settings option. For more information, see
Warning—Potential Damage: Restoring factory defaults returns most printer settings to the original factory default
settings. Exceptions include the display language, custom sizes and messages, and network/port menu settings. All
downloads stored in the RAM are deleted. Downloads stored in the flash memory or in the printer hard disk are not
affected.
From the printer control panel, navigate to:
> Settings > > Settings >
> Settings > > General Settings >
.
"Erasing non‑volatile memory" on page
> General Settings >
"Printing a menu settings page" on page
> Factory Defaults >
.
73.
78.
> Restore Now >
76