Lexmark MS810 Series User Manual page 108

Using MS810de
•
There are different ways of loading letterhead depending on whether an optional staple finisher is installed or
not.
•
If you are loading prepunched paper for use with the staple finisher, then make sure the holes on the long edge
of the paper are on the right side of the tray.
Note: If the holes on the long edge of the paper are on the left side of the tray, then a jam may occur.
Without an optional staple finisher With an optional staple finisher
One‑sided printing
Two‑sided printing
One‑sided printing
One‑sided printing
Two‑sided printing
Two‑sided printing
108