Lexmark MS810 Series User Manual page 37

Additional printer setup
Connecting the printer to a network using the Wireless Setup Wizard
Before you begin, make sure that:
•
A wireless network adapter is installed in the printer and is working properly. For more information, see the
instruction sheet that came with the wireless network adapter.
•
The Ethernet cable is disconnected from the printer.
•
Active NIC is set to Auto. To set this to Auto, navigate to one of the following:
–
> Settings >
–
> Network/Ports > Active NIC > Auto
–
> Network/Ports > Active NIC > Auto > Submit
Note: Make sure to turn off the printer, then wait for at least five seconds, and then turn on the printer.
1
From the printer control panel, navigate to one of the following:
•
> Settings >
> Wireless Connection Setup >
•
> Network/Ports > Network [x] > Network [x] Setup > Wireless > Wireless Connection Setup
• > Network/Ports > Network [x] > Network [x] Setup > Wireless > Wireless Connection Setup
2
Select a wireless connection setup.
Use
Search for networks
Enter a network name Manually enter the SSID.
Wi‑Fi Protected Setup Connect the printer to a wireless network using Wi‑Fi Protected Setup.
3
Follow the instructions on the printer display.
Connecting the printer to a wireless network using the Wi-Fi Protected Setup
Before connecting the printer to a wireless network, make sure that:
• The access point (wireless router) is Wi‑Fi Protected Setup (WPS) certified or WPS‑compatible. For more
information, see the documentation that came with your access point.
•
A wireless network adapter installed in your printer is attached and working properly. For more information, see
the instruction sheet that came with the wireless network adapter.
> Network/Ports >
> Network/Ports >
To
Show available wireless connections.
Note: This menu shows all broadcast secured or unsecured SSIDs.
Note: Make sure to enter the correct SSID.
> Active NIC > > Auto >
> Network [x] > > Network [x] Setup >
37
> Wireless >