Ordering Staple Cartridges; Ordering A Maintenance Kit - Lexmark MS810 Series User Manual

Maintaining the printer

Ordering staple cartridges

Item
Staple cartridges
Ordering a roller kit
For more information on replacing the roller kit, see the instruction sheet that came with the part.
Lexmark roller kit and part number
Type
Printer engine roller maintenance kit

Ordering a maintenance kit

To identify the supported fuser type, view the label on the fuser. Do either of the following:
•
Remove the toner cartridge and the imaging unit. The two-digit fuser type code (such as 00 or 01) can be seen on
the front of the fuser.
Warning—Potential Damage: Do not expose the imaging unit to direct light for more than 10 minutes.
Extended exposure to light may cause print quality problems.
•
Pull down the printer rear door. The two-digit fuser type code (such as 00 or 01) can be seen on the rear of the
fuser.
Notes:
•
Using certain types of paper may require more frequent replacement of the maintenance kit.
• The separator roller, fuser, pick roller assembly, and transfer roller are all included in the maintenance kit and
can be individually ordered and replaced if necessary.
•
For more information on replacing the maintenance kit, see the instruction sheet that came with the supply.
Lexmark Return Program fuser maintenance kits and part numbers for MS810, MS811, and MS812
Lexmark regular fuser maintenance kits and part numbers for MS810, MS811, and MS812
Part number
40X7706
Fuser maintenance kit type
Type 00
Type 01
Type 02
Type 03
Type 04
Fuser maintenance kit type
Type 05
Type 06
Part number
25A0013
Part number
40X8420
40X8421
40X8422
40X8423
40X8424
Part number
40X8425
40X8426
248