Transparency Print Quality Is Poor; Uneven Print Density - Lexmark MS810 Series User Manual

Troubleshooting

Transparency print quality is poor

Action
Step 1
From the printer control panel, set the paper type in the Paper menu to
match the paper loaded in the tray.
Is the paper type for the tray set to Transparency?
Step 2
a
Check if you are using a recommended type of transparency.
b
Resend the print job.
Is the print quality still poor?

Uneven print density

Action
Replace the imaging unit, and then resend the print job.
Is the print density uneven?
Vertical voids appear on prints
Leading edge
Trailing edge
Action
Step 1
a
Make sure your software program is using a correct fill pattern.
b
Resend the print job.
Do vertical voids appear on prints?
Yes No
Go to step 2. Set the paper type to
Transparency.
Contact customer The problem is solved.
support.
Yes No
Contact customer The problem is solved.
support.
Yes No
Go to step 2. The problem is solved.
331