Postscript Menu - Lexmark MS810 Series User Manual

Understanding the printer menus
PDF menu
Use
Scale to Fit
Yes
No
Annotations
Do Not Print
Print

PostScript menu

Use
Print PS Error
On
Off
Lock PS Startup Mode
On
Off
Font Priority
Resident
Flash/Disk
PCL Emul menu
Use
Font Source
Resident
Disk
Download
Flash
All
To
Scale page content to fit the selected paper size.
Note: No is the factory default setting.
Print annotations in a PDF.
Note: Do Not Print is the factory default setting.
To
Print a page containing the PostScript error.
Note: Off is the factory default setting.
Disable the SysStart file.
Note: Off is the factory default setting.
Establish the font search order.
Notes:
• Resident is the factory default setting.
•
This menu item is available only when a formatted flash memory option
card or printer hard disk is installed and operating properly.
• Make sure the flash memory option or printer hard disk is not
read/write‑, write‑, or password‑protected.
•
Job Buffer Size must not be set to 100%.
To
Specify the set of fonts used by the Font Name menu.
Notes:
•
"Resident" is the factory default setting. Resident shows the factory
default set of fonts downloaded in the RAM.
•
"Flash" and "Disk" settings show all fonts resident in that option.
•
The flash option must be properly formatted and cannot be read/write‑,
write‑, or password‑protected.
•
"Download" shows all the fonts downloaded in the RAM.
•
"All" shows all fonts available to any option.
235