Network/Ports Menu - Lexmark MS810 Series User Manual

Understanding the printer menus
Use
Profiles List
Print Fonts
PCL Fonts
PostScript Fonts
Print Directory
Asset Report

Network/Ports menu

Active NIC menu
Use
Active NIC
Auto
[list of available network cards]
Standard Network or Network [x] menu
Note: Only active ports appear in this menu.
Use
Energy Efficient Ethernet
Enable
Disable
PCL SmartSwitch
On
Off
To
Print a list of profiles stored in the printer.
Note: This menu item appears only when LDSS is enabled.
Print a report of all the fonts available for the printer language currently set in
the printer.
Note: A separate list is available for PCL and PostScript emulations.
Print a list of all the resources stored in an optional flash memory card or printer
hard disk.
Notes:
• Job Buffer Size must be set to 100%.
•
Make sure the optional flash memory or printer hard disk is installed
correctly and working properly.
•
This menu item appears only when an optional flash drive or printer hard
disk is installed.
Print a report containing printer asset information, such as serial number and
model name.
To
Allow the printer to connect to a network.
Notes:
• Auto is the factory default setting.
•
This menu item appears only if an optional network adapter is installed.
To
Reduce power consumption when the printer receives no data from the Ethernet
network.
Note: Enable is the factory default setting.
Set the printer to automatically switch to PCL emulation when a print job requires
it, regardless of the default printer language.
Notes:
•
On is the factory default setting.
•
If PCL SmartSwitch is disabled, then the printer does not examine incoming
data and it uses the default printer language specified in the Setup menu.
198