Lexmark MS810 Series User Manual page 41

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn
The following illustration shows the maximum number of optional finishers and trays that are supported by the printer.
For more information on other configurations, visit www.lexmark.com/multifunctionprinters.
The staple, hole punch finisher must not be combined with any other output options.
In a configuration with two or more optional finishers:
• The staple finisher must always be on top.
•
The high‑capacity output expander must always be at the bottom.
Hardware option Alternative hardware option
1 Staple finisher
2 4‑bin mailbox
3 Caster base None
4 2100‑sheet tray None
5 550‑sheet tray 250‑sheet tray
6 250‑sheet tray 550‑sheet tray
7 4‑bin mailbox Output expander
8 Output expander 4‑bin mailbox
•
Output expander
•
4‑bin mailbox
• Staple, hole punch finisher
•
Staple finisher
•
Staple, hole punch finisher
•
Output expander
41