Lexmark MS810 Series User Manual page 107

Using MS810de
4
Prepare the paper or specialty media for loading.
•
Flex sheets of paper back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten
the edges on a level surface.
•
Hold transparencies by the edges, and then fan them. Straighten the edges on a level surface.
Note: Avoid touching the printable side of the transparencies. Be careful not to scratch them.
•
Flex the stack of envelopes back and forth to loosen them, and then fan them. Straighten the edges on a level
surface.
5
Load the paper or specialty media.
Note: Slide the stack gently into the multipurpose feeder until it comes to a stop.
• Load only one size and type of paper or specialty media at a time.
•
Make sure the paper fits loosely in the multipurpose feeder, lies flat, and is not bent or wrinkled.
107