Lexmark MS810 Series User Manual page 216

Understanding the printer menus
Use
Show Supply Estimates
Show estimates
Do not show estimates
Eco-Mode
Off
Energy
Energy/Paper
Paper
Quiet Mode
Off
On
Run Initial setup
Yes
No
To
Get an estimate on the status of supplies.
Notes:
•
Show estimates displays the estimated supply status in pages
on the control panel, printer Web page, and on the Menu
Settings and the Device Statistics reports.
•
Do not show estimates hides the estimated supply status in
any location.
Minimize the use of energy, paper, or specialty media.
Notes:
•
For touch‑screen printer models, touch Eco‑Mode, and then
select from the options.
•
Off is the factory default setting. Off resets the printer to its
factory default settings.
•
Energy minimizes the power used by the printer.
Performance may be affected, but print quality is not.
•
Energy/Paper minimizes the use of power and of paper and
specialty media.
•
Paper minimizes the amount of paper and specialty media
needed for a print job. Performance may be affected, but
print quality is not.
Reduce the amount of noise produced by the printer.
Notes:
•
For touch‑screen printer models, touch Quiet Mode, and
then select from the options.
•
Off is the factory default setting. This setting supports the
performance specifications for your printer.
•
On configures the printer to produce as little noise as
possible. This setting is best suited for printing text and line
art.
•
Selecting Photo from the printer driver may disable Quiet
mode and provide better print quality and full‑speed
printing.
Instruct the printer to run the setup wizard.
Notes:
•
Yes is the factory default setting.
• After completing the setup wizard by selecting Done at the
Country select screen, the default becomes No.
216