Lexmark MS810 Series User Manual page 169

Using MS812de
•
If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2
Click Settings > General Settings > Eco‑Mode.
3
Select a setting.
Use To
Off Use the factory default settings for all settings associated with Eco‑Mode.
Notes:
•
Settings that were changed when other modes were selected are reset to the factory default
settings.
•
Off supports the performance specifications of the printer.
Energy Reduce energy use, especially when the printer is idle.
Notes:
•
Printer engine motors do not start until a document is ready to print. You may notice a short
delay before the first page is printed.
•
The printer enters Sleep mode after one minute of inactivity.
• The printer display is turned off when the printer is in Sleep mode.
•
Lights on the staple finisher and other optional finishers are turned off when the printer is in
Sleep mode.
Energy/Paper Use all the settings associated with Energy and Paper modes.
Plain Paper Enable the automatic two‑sided (duplex) printing feature.
4
Click Submit.
Reducing printer noise
Enable Quiet mode to reduce printer noise.
1
Open a Web browser, and then type the printer IP address in the address field.
Notes:
•
View the printer IP address on the printer home screen. The IP address appears as four sets of numbers
separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2
Click Settings > General Settings > Quiet Mode.
3
Select a setting.
169