Troubleshooting
PPDS font error [50]
Try one or more of the following:
•
From the printer control panel, select Continue to clear the message and continue printing. For non‑touch‑screen
printer models, press
•
If the printer cannot find the requested font, then from the printer control panel, navigate to:
PPDS menu > Best Fit > On
The printer will find a similar font and reformat the affected text.
•
Cancel the current print job.
Paper changes needed
Try one or more of the following:
•
Select Use current supplies on the printer control panel to clear the message and continue printing.
For non-touch-screen printer models, press
•
Cancel the current print job.
Parallel port [x] disabled [56]
Try one or more of the following:
•
Select Continue to clear the message. For non-touch-screen printer models, press
The printer discards any data received through the parallel port.
•
Select Reset active bin to reset the bin for a linked set of bins.
Reattach bin [x]
Try one or more of the following:
•
Turn off the printer, and then turn it back on.
•
Reattach the specified bin.
1
Turn off the printer.
2
Unplug the power cord from the electrical outlet.
3
Remove the specified bin.
4
Reattach the bin.
5
Connect the power cord to a properly grounded electrical outlet.
6
Turn the printer back on.
•
Remove the specified bin:
1
Turn off the printer.
2
Unplug the power cord from the electrical outlet.
to confirm.
to confirm.
292
to confirm.