Hardware And Internal Option Problems - Lexmark MS810 Series User Manual

Troubleshooting

Hardware and internal option problems

2100-sheet tray problems
Action
Step 1
a
Pull out the tray, and then do one or more of the following:
• Make sure paper lies flat in the tray.
•
Check for paper jams or misfeeds.
•
Check if the paper size indicators on the paper guides are aligned
with the paper size indicators on the tray.
•
Check if the paper guides are aligned against the edges of the
paper.
•
Make sure the paper is below the maximum paper fill indicator.
•
Check if you are printing on a recommended paper size and type.
• Check if the paper or specialty media meets specifications and is
not damaged.
b
Insert the tray properly.
Note: Press the paper stack down while inserting the tray.
Does the tray operate properly?
Step 2
Turn off the printer, then wait about 10 seconds, and then turn it back on.
Does the tray operate properly?
Step 3
Print a menu settings page, and then check if the tray is listed in the
Installed Features list.
Note: If the tray is listed in the menu settings page, but paper jams
when it enters or exits the tray, then it may not be properly installed.
Is the tray listed in the menu settings page?
Step 4
Check if the tray is available in the printer driver.
Note: You may need to manually add the tray in the printer driver to
make it available for print jobs. For more information, see
available options in the print driver" on page
Is the tray available in the printer driver?
Step 5
Check if the tray is selected.
From the application you are using, select the tray. If you are using
Mac OS X version 9, then make sure the printer is set up in Chooser.
Does the tray operate properly?
"Adding
34.
Yes No
The problem is solved. Go to step 2.
The problem is solved. Go to step 3.
Go to step 4. For more information,
see the setup sheet
that came with the
2100-sheet tray.
Go to step 5. Manually add the tray
in the printer driver.
The problem is solved. Contact
support.
309
customer