Reset The Model - JR X9303 2.4 Instruction And Programming Manual

RESET THE MODEL

When setting up a new model it is important to reset
all parameters to their default or factory settings before
proceeding with any other programming. This is to ensure
that there are no program mixes, trims or other functions
left over from a previous model or programming session.
[MDL Reset]
LST
MODEL 2
RES
[MDL Reset]
LST
MODEL 2
NO
Are you sure? Y/N
YES
1. In the SYSTEM Menu, highlight and select MDL
Reset using the Selector.
2. Press the CLR button that is next to RES
on the display.
3. Press the lowermost button next to YES on the display
to reset all data for this model.
4. Return to the SYSTEM Menu by pressing
the LIST button.
ACRO
ACRO
A-3