Model Name; Type Select - JR X9303 2.4 Instruction And Programming Manual

Model Name

The model name screen allows each model to be given
an eight digit name or number. This is convenient for
identifying a model or the channel number the model
is on. The model's name will appear in the upper right
corner of the main info screen.
1. In the
SYSTEM Menu
using the Selector.
4. Return to the SYSTEM Menu by pressing the
LIST button.

Type Select

Type select allows the model type to be selected. Model
types include glider, acro or heli. Note: When changing
model types the programming information will be reset to
the factory default setting losing the previous settings.
3. Return to the SYSTEM Menu by pressing the
LIST button.
S-6
, highlight and select
MDL Name
[MDL Name]
MODEL 1
[Type SEL]
GLID
2. The cursor (indicates where the next character will be
placed) is positioned at the beginning of the model name.
Press the Selector to obtain a list of available characters.
3. Highlight and select the desired character to form the
model name. After the character is selected, rotate
the Selector to position the cursor where the next
character is to be placed and press the Selector to
obtain the character list again. Repeat until the model
name is completed.
GLID <ZENITH >
1. In the
SYSTEM Menu
using the Selector.
2. Highlight and select
MODEL 1 GLID
ACRO HELI
, highlight and select
Type SEL
using the Selector .
GLID